! VLBA sched file for pulsar parallax project
!
! This file was automatically generated by autosched Ver. 1.3
! at Fri May 30 06:58:48 2003
!
! Total observation length should be 7200.000000 seconds

version = 1
overwrite

expcode = bc120bg

! ================================================================
!                Preferred Dynamic Contraints.
! ================================================================
! Equipment constraints:
!
!    Minimum number of stations: 9
!    May we swap PT for a single VLA antenna?  no
!
!    Bands and polarizations: 20 cm dual pol required
!
! Weather constraints: reasonably good weather conditions
!
! Date constraints:
!    Please see note1 and note2 below
! ================================================================

! Contact

piname   = 'Shami Chatterjee'
address1 = 'Cornell University'
address2 = '515 Space Sciences'
address3 = 'Ithaca NY 14853  '
address4 = 'USA'
phone    = '607 255 9020 '
obsphone = '607 255 9020 '
email    = 'shami@astro.cornell.edu'

! Correlation

correl  = 'Socorro'
corsrcs = 'Schedule'
coravg  = 2
corchan = 32
cornant = 10
corpol  = 'off'
corwtfn = 'uniform'
cortape = DAT
corship1= 'Walter Brisken'
corship2= 'NRAO'
corship3= 'Socorro, NM 87801'

cornote1= 'Multiple cor. passes requested for source B2045-16.pt'
cornote2= 'Pass 1 : Use coords for source B2045-16 and use pulsar gate'
cornote3= 'Pass 2 : Use coords for source B2045-16.11 without pulsar gate'
cornote4= 'Pass 3 : Use coords for source B2045-16.08 without pulsar gate'

! Random

dosta   = 'vlba'
autotape= 2
minpause= 30
prestart= 10
pcal    = 'off'
stafile = $SCHED/catalogs/stations.dat
stations= VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK
obstype = VLBA
note1   = 'The optimal observation date is Aug 2.'
note2   = 'Please try to observe within 2 weeks of this date.'

! Setup

setup   = v18cm-256-8-2-psrvlb.set

! When

day   = 52904   ! year 2003.725000
LST   = 'VLBA_PT'
start = 19:30:00


! Sources

srccat /

  ! Pulsar  epoch = 2003.725000
    source = 'B2045-16'  ra = 20:48:35.601505  dec = -16:16:44.592246  epoch = 'J2000'  calcode = 'G' /

  ! pointing center
    source = 'B2045-16.pt'  ra = 20:48:33.797555  dec = -16:10:45.530508  epoch = 'J2000' /

  ! Phase calibrators
    ! sep = 28.829419 arcmin
    source = 'J2047-1639'  ra = 20:47:19.667019  dec = -16:39:05.84258  epoch = 'J2000' /

  ! Geodesy calibrators
    source = 'J2110-1020'  ra = 21:10:00.979002  dec = -10:20:57.31941  epoch = 'J2000' /

    source = 'J2011-1546'  ra = 20:11:15.710931  dec = -15:46:40.25382  epoch = 'J2000' /

    source = 'J2040-2507'  ra = 20:40:08.772872  dec = -25:07:46.66282  epoch = 'J2000' /

    source = 'J2025-0735'  ra = 20:25:40.660419  dec = -07:35:52.68901  epoch = 'J2000' /

  ! In-beam calibrators
    source = 'B2045-16.11'  ra = 20:48:36.69994  dec = -16:09:45.4394  epoch = 'J2000' /

    source = 'B2045-16.08'  ra = 20:48:49.57191  dec = -16:00:13.9195  epoch = 'J2000' /

    source = 'B2045-16.09'  ra = 20:48:08.93113  dec = -16:01:45.2250  epoch = 'J2000' /

endcat /


! Scans

  ! Main loop
  source = 'J2047-1639' dwell = 268 /
  group 2 rep 31
    source = 'B2045-16.pt' dwell = 120 /
    source = 'J2047-1639' dwell = 90 /

exit