! VLBA sched file for pulsar parallax project
!
! This file was automatically generated by autosched Ver. 1.3
! at Mon Sep  8 11:26:25 2003
!
! Total observation length should be 7200.000000 seconds

version = 1
overwrite

expcode = bc120cr

! ================================================================
!                Preferred Dynamic Contraints.
! ================================================================
! Equipment constraints:
!
!    Minimum number of stations: 9
!    May we swap PT for a single VLA antenna?  no
!
!    Bands and polarizations: 20 cm dual pol required
!
! Weather constraints: reasonably good weather conditions
!
! Date constraints:
!    Please see note1 and note2 below
! ================================================================

! Contact

piname   = 'Shami Chatterjee'
address1 = 'Cornell University'
address2 = '515 Space Sciences'
address3 = 'Ithaca NY 14853  '
address4 = 'USA'
phone    = '607 255 9020 '
obsphone = '607 255 9020 '
email    = 'shami@astro.cornell.edu'

! Correlation

correl  = 'Socorro'
corsrcs = 'Schedule'
coravg  = 2
corchan = 32
cornant = 10
corpol  = 'off'
corwtfn = 'uniform'
cortape = DAT
corship1= 'Walter Brisken'
corship2= 'NRAO'
corship3= 'Socorro, NM 87801'

cornote1= 'Multiple cor. passes requested for source B2154+40.pt'
cornote2= 'Pass 1 : Use coords for source B2154+40 and use pulsar gate'
cornote3= 'Pass 2 : Use coords for source B2154+40.03 without pulsar gate'
cornote4= 'Pass 3 : Use coords for source B2154+40.11 without pulsar gate'

! Random

dosta   = 'vlba'
autotape= 2
minpause= 30
prestart= 10
pcal    = 'off'
stafile = $SCHED/catalogs/stations.dat
stations= VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK
obstype = VLBA
note1   = 'The optimal observation date is Dec 13.'
note2   = 'Please try to observe within 2 weeks of this date.'

! Setup

setup   = v18cm-256-8-2-psrvlb.set

! When

day   = 52959   ! year 2003.875000
LST   = 'VLBA_PT'
start = 21:00:00


! Sources

srccat /

  ! Pulsar  epoch = 2003.875000
    source = 'B2154+40'  ra = 21:57:01.841059  dec = 40:17:46.068574  epoch = 'J2000'  calcode = 'G' /

  ! pointing center
    source = 'B2154+40.pt'  ra = 21:57:20.124465  dec = 40:12:53.073713  epoch = 'J2000' /

  ! Phase calibrators
    ! sep = 135.091417 arcmin
    source = 'J2202+4216'  ra = 22:02:43.291378  dec = 42:16:39.97994  epoch = 'J2000' /

  ! Geodesy calibrators
    source = 'J2233+4245'  ra = 22:33:32.406525  dec = 42:45:39.92433  epoch = 'J2000' /

    source = 'J2212+3308'  ra = 22:12:07.977281  dec = 33:08:34.51881  epoch = 'J2000' /

    source = 'J2109+3532'  ra = 21:09:31.878733  dec = 35:32:57.59742  epoch = 'J2000' /

    source = 'J2123+4614'  ra = 21:23:31.828487  dec = 46:14:22.96096  epoch = 'J2000' /

  ! In-beam calibrators
    source = 'B2154+40.03'  ra = 21:57:54.02421  dec = 40:04:54.6025  epoch = 'J2000' /

    source = 'B2154+40.11'  ra = 21:57:17.80378  dec = 40:12:25.4848  epoch = 'J2000' /

endcat /


! Scans

  ! Main loop
  source = 'J2202+4216' dwell = 320 /
  group 2 rep 28
    source = 'B2154+40.pt' dwell = 120 /
    source = 'J2202+4216' dwell = 90 /

exit