! VLBA sched file for pulsar parallax project
!
! This file was automatically generated by autosched Ver. 1.3
! at Thu Mar 18 16:40:19 2004
!
! Total observation length should be 7200.000000 seconds

version = 1
overwrite

expcode = bc120ez

! ================================================================
!                Preferred Dynamic Constraints.
! ================================================================
! Equipment constraints:
!
!    Minimum number of stations: 9
!    May we swap PT for a single VLA antenna?  no
!
!    Bands and polarizations: 20 cm dual pol required
!
! Weather constraints: reasonably good weather conditions
!
! Date constraints:
!    Please see note1 and note2 below
! ================================================================

! Contact

piname   = 'Shami Chatterjee'
address1 = 'NRAO'
address2 = 'PO Box O'
address3 = 'Socorro, NM 87801'
address4 = 'USA'
phone    = '505-835-7334'
obsphone = '505-835-7334'
email    = 'schatter@nrao.edu'

! Correlation

correl  = 'Socorro'
corsrcs = 'Schedule'
coravg  = 2
corchan = 32
cornant = 10
corpol  = 'off'
corwtfn = 'uniform'
cortape = DAT
corship1= 'Walter Brisken'
corship2= 'NRAO'
corship3= 'Socorro, NM 87801'

cornote1= 'Multiple cor. passes requested for source B2310+42.pt'
cornote2= 'Pass 1 : Use coords for source B2310+42 and use pulsar gate'
cornote3= 'Pass 2 : Use coords for source B2310+42.14 without pulsar gate'

! Random

dosta   = 'vlba'
autotape= 2
minpause= 30
prestart= 10
pcal    = 'off'
stafile = $SCHED/catalogs/stations.dat
stations= VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK
obstype = VLBA
note1   = 'The optimal observation date is Jul 2.'
note2   = 'Please try to observe within 2 weeks of this date.'

! Setup

setup   = v18cm-256-8-2-psrvlb.set

! When

day   = 53182   ! year 2004.485000
LST   = 'VLBA_PT'
start = 22:00:00


! Sources

srccat /

  ! Pulsar  epoch = 2004.485000
    source = 'B2310+42'  ra = 23:13:08.613992  dec = 42:53:12.992410  equinox = 'J2000'  calcode = 'G' /

  ! pointing center
    source = 'B2310+42.pt'  ra = 23:12:49.160497  dec = 42:48:23.357726  equinox = 'J2000' /

  ! Phase calibrators
    ! sep = 150.177776 arcmin
    source = 'J2322+4445'  ra = 23:22:20.358078  dec = 44:45:42.35347  equinox = 'J2000' /

  ! Geodesy calibrators
    source = 'J2248+3718'  ra = 22:48:37.910511  dec = 37:18:12.46286  equinox = 'J2000' /

    source = 'J2240+5133'  ra = 22:40:19.878393  dec = 51:33:11.79615  equinox = 'J2000' /

    source = 'J2322+5057'  ra = 23:22:25.982159  dec = 50:57:51.96371  equinox = 'J2000' /

  ! In-beam calibrators
    source = 'B2310+42.14'  ra = 23:12:13.49560  dec = 42:39:32.3585  equinox = 'J2000' /

endcat /


! Scans

  ! Main loop
  source = 'J2322+4445' dwell = 283 /
  group 2 rep 27
    source = 'B2310+42.pt' dwell = 120 /
    source = 'J2322+4445' dwell = 90 /

exit