! VLBA sched file for pulsar parallax project
!
! This file was automatically generated by autosched Ver. 1.3
! at Sun Dec 14 13:29:42 2003
!
! Total observation length should be 7200.000000 seconds

version = 1
overwrite

expcode = bc120dy

! ================================================================
!                Preferred Dynamic Constraints.
! ================================================================
! Equipment constraints:
!
!    Minimum number of stations: 9
!    May we swap PT for a single VLA antenna?  no
!
!    Bands and polarizations: 20 cm dual pol required
!
! Weather constraints: reasonably good weather conditions
!
! Date constraints:
!    Please see note1 and note2 below
! ================================================================

! Contact

piname   = 'Shami Chatterjee'
address1 = 'Cornell University'
address2 = '515 Space Sciences'
address3 = 'Ithaca NY 14853  '
address4 = 'USA'
phone    = '607 255 9020 '
obsphone = '607 255 9020 '
email    = 'shami@astro.cornell.edu'

! Correlation

correl  = 'Socorro'
corsrcs = 'Schedule'
coravg  = 2
corchan = 32
cornant = 10
corpol  = 'off'
corwtfn = 'uniform'
cortape = DAT
corship1= 'Walter Brisken'
corship2= 'NRAO'
corship3= 'Socorro, NM 87801'

cornote1= 'Multiple cor. passes requested for source J1835-11.pt'
cornote2= 'Pass 1 : Use coords for source J1835-1106 and use pulsar gate'
cornote3= 'Pass 2 : Use coords for source J1835-11.04 without pulsar gate'

! Random

dosta   = 'vlba'
autotape= 2
minpause= 30
prestart= 10
pcal    = 'off'
stafile = $SCHED/catalogs/stations.dat
stations= VLBA_SC, VLBA_HN, VLBA_NL, VLBA_FD, VLBA_LA, VLBA_PT, VLBA_KP, VLBA_OV, VLBA_BR, VLBA_MK
obstype = VLBA
note1   = 'The optimal observation date is Mar 28.'
note2   = 'Please try to observe within 2 weeks of this date.'

! Setup

setup   = v18cm-256-8-2-psrvlb.set

! When

day   = 53050   ! year 2004.125000
LST   = 'VLBA_PT'
start = 17:30:00


! Sources

srccat /

  ! Pulsar  epoch = 2004.125000
    source = 'J1835-1106'  ra = 18:35:18.350032  dec = -11:06:16.855593  equinox = 'J2000'  calcode = 'G' /

  ! pointing center
    source = 'J1835-11.pt'  ra = 18:35:18.962681  dec = -11:11:08.072496  equinox = 'J2000' /

  ! Phase calibrators
    ! sep = 435.263148 arcmin
    source = 'J1827-0405'  ra = 18:27:45.040424  dec = -04:05:44.57841  equinox = 'J2000' /

  ! Geodesy calibrators
    source = 'J1832-2039'  ra = 18:32:11.046532  dec = -20:39:48.20308  equinox = 'J2000' /

    source = 'J1911-2006'  ra = 19:11:09.652893  dec = -20:06:55.10907  equinox = 'J2000' /

    source = 'J1752-1011'  ra = 17:52:36.974113  dec = -10:11:44.73048  equinox = 'J2000' /

  ! In-beam calibrators
    source = 'J1835-11.04'  ra = 18:35:19.57533  dec = -11:15:59.2894  equinox = 'J2000' /

endcat /


! Scans

  ! Main loop
  source = 'J1827-0405' dwell = 188 /
  group 2 rep 28
    source = 'J1835-11.pt' dwell = 120 /
    source = 'J1827-0405' dwell = 90 /

exit